Raspberry Pi 3 Fan Case (40mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for Raspberry Pi 3, with 40mm fan and cutouts for GPIO pins and the two ribbon connectors.
- Ocena
- 4,875 / 5
- Polubienia
- 73
- Pobrania
- 757
- Wydruki
- 8
- Wyświetlenia
- 2527
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I did not find a case that really fit all of my needs and taste, so I decided to watch a Fusion360 Tutorial and make my own.
Through some trial and error I came up with this: a clean case for the RPI 3 that is tall enough for a heatsink and has the fan inside, not mounted on the outside.
The design is still work in progress, so please be kind and feel free to point out any dumb stuff I did, or give me some ideas!
Update v1.1
- Added top case version without cutouts
- Made the USB and Ethernet port dividers wider
- Added vent holes on the other side too
- Made Micro-USB Port opening fit slightly better
- Made SD Card opening have a slightly better shape
Print settings:
0.2 Layer height
3 Perimeters
Infill doesn't really matter at 2mm wall width
2-3 bottom and top layers
No supports anywhere
PLA or PETG