Quiet cooler for Deye 12K Inverter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€10.11 – €12.36 net (excluding VAT)
For file: InverterCooler_Part2_0.2mm_PETG_MK3S_10h55m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €11.24 excluding VAT (range midpoint).
- Weight reported by the author
- 158 g
- Print time reported by the author
- 10.91 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Quiet cooler with 3 fans and a fan controller for mounting on top of Deye 12K inverter.
- Rating
- 5 / 5
- Likes
- 54
- Downloads
- 1,028
- Makes
- 6
- Views
- 8,179
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
The cooler prints in two parts that is glued together. The three "sticks" that is printed with part 1 is used to strengthen the join. Glue them on the inside over the the join.
There is a holder for the HW-585 12V fan controller
You will need:
- 3 * 120 mm PWM fans (I used Noctua NF-A12x25 PWM)
- 2 * Y-cables (they may be included with the fans) (all fans connect to one fan header)
- 3 * 120 mm fan grills
- HW-585 fan controller
- 12V universal power supply
- DC-panel socket (for connecting the power supply to the cooler.
Only fan header 1 is temperature-controlled. Connect all fans to header 1 using the Y-cables.
I used a thermal pad and a piece of tape to connect the thermistor to a hotspot on the cabinet.