ReoLink RLC-420 Wall Mount V1
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€10.22 – €12.49 net (excluding VAT)
For file: reolink-mount-v1_02mm_pla_mk3.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €11.36 excluding VAT (range midpoint).
- Weight reported by the author
- 159 g
- Print time reported by the author
- 10.55 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wall Mounting bracket for the Reolink RLC-420 dome camera.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 202
- Makes
- 0
- Views
- 2,095
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
Wall Mounting bracket for the Reolink RLC-420 dome camera. This is for cameras that need to mount on a wall but view through a window or other opening.
Print instructions
Print uses M4 x 20mm screws and nuts to mount the camera to the bracket. You can use standard deckmate 2.5 inch screws to mount into the wall.
MATERIAL: PLA or PETG (if using outdoors)
INFILL %: 10-15
FILL PATTERN: Cubic
TOP/BOTTOM FILL PATTERN: Rectilinear