Cabinet Hinge Repair Plate
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.78 – €2.18 net (excluding VAT)
For file: CE3E3V2_cabinet repair plate 2.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.98 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 2.5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Screws often pull out of chipboard cabinets when strained. This will repair them.
- Rating
- 0 / 5
- Likes
- 61
- Downloads
- 383
- Makes
- 1
- Views
- 2,496
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
I searched for a repair solution to the problem of kitchen cabinet door hinges being pulled off breaking the screw holes in the cabinet. I tried a couple of solutions but really they were not effective. I found that the hinge wasn't adjustable or didn't fit. I decided a nuts and bolts approach is best. Drill out the old broken holes in the frame with a 20mm forstner bit or hole saw to a depth of about 10mm don't drill through! . Then mount the plate and hinge complete with captive 5mm nuts and 16mm long cap screws or set screws. Use washers over the hinge to aid easy adjustment up and down. A 20mm hole give some adjustment and the slots in the hinge give more. I bought replacement hinges which fit well from B&Q, there is some variation in width of these and you could adjust in Tinkercad if needed. One of the photos shows a piece of scrap wood used as a test fit and later as a guide for the hole saw or forstner bit handy to have ready.
Print with cross shape flat to bed and use Support I used tree support easy to remove on my Xvico X3s.