IKEA Kallax Stand Adapter for Expedit - 2 Cube Width
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy adapter to mount older Expedit bookcases on the new Kallax stand
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 25
- Makes
- 0
- Views
- 731
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
These are adapters to allow the use of Kallax Stands with Expedit shelves. They do not require extra hardware other than the printed parts.
An anti-tip kit is highly recommended. Especially for the 8 Cube version.
For 4 Cube Expedit:
Drop in replacement. Just replace the white circular piece IKEA instructs to attach to the screws of the Kallax with the printed piece.
For 8 Cube Expedit:
Print 2x of each left and right piece for each side and glue the notched parts together with super glue or a strong glue of your choice. Due to the vastly different hole placement of the 8 cube Expedit compared to the 8 Cube Kallax, the adapter will cause the shelf to not sit flush with the stand. Thus a spacer in the center and stuck with glue or mounting tape is required to prevent bowing of the shelf itself.