IKEA Kallax Stand Adapter for Expedit - 2 Cube Width
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy adapter to mount older Expedit bookcases on the new Kallax stand
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 733
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
These are adapters to allow the use of Kallax Stands with Expedit shelves. They do not require extra hardware other than the printed parts.
An anti-tip kit is highly recommended. Especially for the 8 Cube version.
For 4 Cube Expedit:
Drop in replacement. Just replace the white circular piece IKEA instructs to attach to the screws of the Kallax with the printed piece.
For 8 Cube Expedit:
Print 2x of each left and right piece for each side and glue the notched parts together with super glue or a strong glue of your choice. Due to the vastly different hole placement of the 8 cube Expedit compared to the 8 Cube Kallax, the adapter will cause the shelf to not sit flush with the stand. Thus a spacer in the center and stuck with glue or mounting tape is required to prevent bowing of the shelf itself.