1 / 2
FoxAlien Masuter Pro CNC Offline controller dock 02
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Changes to the way it mounts.
- Rating
- 4 / 5
- Likes
- 20
- Downloads
- 234
- Makes
- 2
- Views
- 940
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I thought the original was a great idea, but when I printed it I realized there was a couple of problems for my setup.
- It mounted very low on the front rail, requiring it to hang over the edge of the table. I will be building a box to hold the CNC router so that won't workT
- the original blocked a tiny bit of the display. I assume FoxAlien modified their controller.
The new version mounts higher on the front rail and widens the display area. I also added a few countersunk mounting holes so it could be screwed to the counter.
There are 2 versions. One moves the holder farther away from the bed so it won't interfere with dust collection.
To mount to the router you'll need M5 x 20mm screws and the appropriate T nuts.