Counting matching models…
I thought the original was a great idea, but when I printed it I realized there was a couple of problems for my setup. It mounted very low on the front rail, requiring it to hang over the edge of the table. I will be building a box to…
Ues this with the FoxAlien low profile vise to get things squared up. Vise: https://www.amazon.com/Profile-Workholding-Machine-Milling-Worktable/dp/B08C26KVD3
There are only a few tools you use regularly on the FoxAlien Masuter Pro CNC router, so I made a little block to hold them. You will need 1 M5 x 6mm cap screw and a way to tap the center hole in the front channel. No supports needed. I…
This Dust Guard protects the X&Y Axis rollers while machining. It has a 2.5mm slot on both sides to fit a piece of felt or brushes that can be cut to length for proper rail contact. The guards can be printed in any material and they are a…
A quick and easy 3d print for a magnetic Quick release 20w (5w) Foxalien Laser module mount - designed to be attached to an already mounted 1.5kw Air Cooled Vevor Spindle. No supports required Print at 0.2mm layers You will require 3x M3…
A simple plate to move the microswitch limit switch on the masuter Pro outwards. This allows the end plates to be used as bump stops and in combination with altering the x belt retainer as per images - you can gain 50-55mm in X movement.…
Zubehör für FoxAlien Masuter Pro CNC. Vakuum Halterung, Knopfhalterung, Gebläsehalterung (Potentiometer) für 20 mm Nutprofil welches auf der Front genutzt wird. Cnc Zubehör. Verwendet von mir: Knopf: GeKLok 5 Stück KCD11 10 mm x 15 mm…
Simple 3d printed mod to gain Y axis travel you will need to flip the tensioner upside down to gain travel too.. as per picture
Plunk your 40W laser into your 69mm router holder. No need to remove brackets requiring retramming each time. I used PLA, and haven't tested it while running the laser so heat issues might be a problem. Print two obviously. I used about…
Corner Angle Clamp for the FoxAlien XE-PRO. The M6 bolts are on a 90mm hole spacing. I originally made the 20mm wide clamp and after using it, decided to make a 40mm wide one for better placement for clamping my work piece. Corner Angle…
Tool Holder for the front or rear of the FoxAlien Mauser Pro CNC Machine. The holder is offset to avoid the dust shoe encounter. Additional hardware required: 2 - T-Nuts 3 - Screws
You can use this adapter to mount the FoxAlien Low Profile Vice on your Makera Z1 desktop CNC machine. The adapter replaces the L bracket at Anchor Point 1, and uses 3 M5 bolts & 2 dowel pins to mount. You will want to check the…
Alignment square for the low profile vice as found here and here. Thank you to the original designer!
This is a drop in replacement for the x and y limit switch end stops for the FoxAlien 4040-xe. I lost one so i just made and printed out new ones. They are slightly more lower profile than the stock ones, but the switch still hits it with…
You'll find explanations in french on my website : https://labidulerie.vicou.be/suceurs-aspirateur/ I made them after walking on the original ;-) The Freecad file provided allows you to adapt the diameter and shape of the part to your own…
This is a fixture to mount the FoxAlien Mini-Vise. I noticed only having two bolts mount the vise to the bed caused one end to be lifted up. This allows three mounting points of the vise to help with that. You will need (3ea) M6 x 8…
A hose adapter to fit the Fox Alien Dust Collector hose (31.7mm diameter) onto the Carvera Air. I added a large fillet around the hose hole, which has made it super easy to pop in/out. The included Fusion file should make it easy to adapt…
i upgrade james dean design, because it had some issues of dust income. my design clip on Category: Parts
Covers that clip to the stand offs on the Y and X axis of the FoxAlien XE-Pro. You can buy the brush material on amazon : https://www.amazon.co.uk/dp/B08Y56B47Z?ref=ppx_yo2ov_dt_b_fed_asin_title should just friction fit in the slots. I…
This is 4 models, one of which is a remix, another is inspired by an existing model and the last part is my own design. Cam lock top piece ( remixed from here ) Cam lock top with hold down rim T-nut ( inspired by ) Railbase - my design…
Hello, My original Laser Engraver protection has been broken because of a software problem. I've glued the broken parts and model it. The original part is 15 € + shipping if you want to order it from fox alien support. I've just made…
Made with help of vacuum-hose-adapter-openscad by Ostat
dust collector for makita router (or vevor router) on a foxalien Masuter pro with dust pipe dust pipe with TPU95A dust collector with PETG Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Category: Parts
I sit my cyclone separator on top of my dust collector, but it slides off sometimes when I'm using the hose to clean out my CNC. I made this tall and thick bucket holder so that even when pulling hard, the bucket won't pop out. I affixed…
A simple model with no supports needed. You can use a pen if its thick enough or you put tape around it. Let me know if this was helpful in anyway and what i could improve on in the future.
EDIT - 8/5/23 Modded the box to include some side vents in case you want to stand it sideways. Also added a hooded Fan Grille. I upgraded to higher torque 2.1a motors on my masuter pro and pretty quickly the stepper drivers got hot and…
The FoxAlien Masuter laser/cnc has an acrylic “case” for the control board that is prone to breaking this is a replacement that mounts to the back of the machine. Does require removing the power switch and soldering wires to it and the…
i got a foxalien 3018 pro cnc for my first cnc router but i was never able to get it to finish a job, it would quit mid job an i was never able to find the reason so i sent it back and instead of just getting a replacement i got one that…
This shorter Masuter Pro Y axis belt tensioner extends the stock Y axis work area up to 430mm. You will need: Longer belts Print 4 of them 4 M5 hex nuts Flip both Y end stop brackets on the frame by 180 degrees Move the front cable chain…
I hated that the extrusion under the belt was getting filled with dust and debris so I designed this little cover. it uses the original screws for the stepper to mount up. you may need to take off some of the excess belt
