1 / 2
FoxAlien Masuter Pro CNC tool holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tool holder for the 2 collet wrenches and the z-probe. It mounts on the left side of the front 2020 channel .
- Rating
- 4 / 5
- Likes
- 19
- Downloads
- 134
- Makes
- 1
- Views
- 925
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
There are only a few tools you use regularly on the FoxAlien Masuter Pro CNC router, so I made a little block to hold them. You will need 1 M5 x 6mm cap screw and a way to tap the center hole in the front channel. No supports needed. I printed it with 0.300 mm layer height. I've added a plastic retainer to keep the wires for the z-probe underneath the front channel. It's a tweaked version of something I found years ago and I can't remember who the original designer was.