eBox Hygrometer Mounting Plate with Cutout for PTFE fitting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adjustment so the Mounting Plate can be used together with a Fitting for PTFE tubes.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 102
- Makes
- 1
- Views
- 671
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When mounting the original mounting plate made by Vivamus3D I noticed that it interefered with the PTFE fitting i was using.
This quick and dirty edit on the model was the solution for it.
First I just tried it for size cutting it out with some box cutters. Since that looked ugly, I decided to tinker with it in TinkerCad.
As many will use some sort of fitting together with their eBox, It might be useful for others to use as well.
As with the Original, I would reccomend printing it with a higher temprature fillament, I used eSun ABS+ for mine.
This is just the baseplate, for the actual holder, be sure to check out the original:
https://www.printables.com/model/274551-hygrometer-for-filament-dryers-sunlu-s1-and-esun-e