1 / 3
James Webb Space Telescope Clock Curved
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clock based on the James Webb Space Telescope JWST
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 57
- Makes
- 1
- Views
- 429
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Parts:
You will need a clock mechanism with a 8mm diameter shaft and a lengh of at least 12mm.
Print:
- 1 main body
- 6 of each of the face plates
Assembly:
Push the corresponding plates into the main body. (See pictures)
Each type are labelled on the back for where to place them.
- HO: High Outside plates go into the outer ring, on the higher areas
- LO: Low Outside plates go into the outer ring, on the lower areas
- I: Inside plates go into the inner ring
NB
Numbers for the plates can be added using prusaslicer and negative volumes.
There are also two tolerances for the face plates, a 0.1mm for a press fit and a 0.2mm to be glued.
Printed in Prusament PLA Viva La Bronze, and Galaxy Black.