"V" the "Visitors" Laser Gun
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
"V" the "Visitors" Laser Gun. The laser gun of the iconic television series of the 80s, "V" the "Visitors".
- Rating
- 5 / 5
- Likes
- 80
- Downloads
- 618
- Makes
- 11
- Views
- 3,146
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
"V" the "Visitors" Laser Gun.
The laser gun of the iconic television series of the 80s, "V" the "Visitors".
Print instructions
Category: Props Summary
"V" the "Visitors" Laser Gun.
The laser gun of the iconic television series of the 80s, "V" the "Visitors".
Print Settings
Printer Brand: Ultimaker
Printer: Ultimaker 2
Rafts: No
Supports: Yes
Resolution: 0.2 mm
Infill: 10-15%
Filament: Fillamentum PLA Traffic Black and Crystal Clear Iceland Blue
Notes:
First I will indicate the general print settings and then detail them for each piece
Nozzle: 0.4 mm
Layer Height: 0.2 mm
Line Width: 0.35 mm
Wall Line Count: 3
Z Seam Alignment: Shortest / Hide Seam
Infill Density: 10-15%
Infill Speed: 60 mm/s
Outer Wall Speed: 20 mm/s
Inner Wall Speed: 35 mm/s
Top/Botton Speed: 30 mm/s
Support: Yes
Support Over Hang Angle: According to piece. Maximum limit of degrees for the minimum supports.
Support Density: 15%
Support Interface Thickness: 0.6 mm
Support Interface Density: 65%
Use Towers: No
Printable parts:
IMPORTANT!! See photos for the print position of each piece.
- V_LaserGun_Body: Aprox.Time: 5 h 30 min. Material: 59 gr.
Z Seam Alignment: Sharpest Corner / Hide or Expose Seam.
Support Over Hang Angle: 82º
Recommended filament: Fillamentum Traficc Black.
- V_LaserGun_Grip: Aprox.Time: 5 h 30 min. Material: 58 gr.
Z Seam Alignment: Sharpest Corner / Hide or Expose Seam.
Support Over Hang Angle: 80º
Recommended filament: Fillamentum Traficc Black.
- V_LaserGun_Cannon: Aprox.Time: 4 h 50 min. Material: 43 gr.
Z Seam Alignment: Shortest / Hide Seam
Support Over Hang Angle: 78º
Recommended filament: Fillamentum Traficc Black.
- V_LaserGun_Rifle_L_Part: Aprox.Time: 4 h 30 min. Material: 42 gr.
Z Seam Alignment: Shortest / Hide Seam
Support Over Hang Angle: 85º
Recommended filament: Fillamentum Traficc Black.
- V_LaserGun_Rifle_conector: Aprox.Time: 30 min. Material: 5 gr.
Support: NO
Recommended filament: Fillamentum Crystal Clear Iceland Blue.
- V_LaserGun_Rifle_Join_Body_Grip: Aprox.Time: 10 min. Material: 2 gr.
Support: NO
Recommended filament: Fillamentum Crystal Traficc Black.