LayersFactory
Report model
1 / 49
"V" the "Visitors" Laser Sniper Rifle — image 1
1 / 49

"V" the "Visitors" Laser Sniper Rifle

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

nacho3D

nacho3D

@nacho3D_101139

V" the "Visitors" Laser Sniper Rifle.

Rating
5 / 5
Likes
33
Downloads
267
Makes
4
Views
1,367
Reviews
1

Updated at source:

Model information

Source
Printables
Category
Props
License
Creative Commons — Attribution — Noncommercial — NoDerivatives
DetailsFiles (26)Makes & comments (Makes: 4) (Comments: 6)Remixes (0)Collections (46)Related

V" the "Visitors" Laser Sniper Rifle.

The laser sniper rifle of the iconic television series of the 80s, "V" the "Visitors".

It is a model that requires a little more time than a single print piece but in my opinion the result is spectacular.

I hope you like it as much as I do and that you enjoy its printing and assembly.

I have tried to simplify the design of the pieces to facilitate their printing and assembly.
In total there are 28 pieces.

The terrible video of the assembly!!... although it is quite simple and intuitive.

Print instructions

Category: Props Summary

V" the "Visitors" Laser Sniper Rifle.

The laser sniper rifle of the iconic television series of the 80s, "V" the "Visitors".

It is a model that requires a little more time than a single print piece but in my opinion the result is spectacular.

I hope you like it as much as I do and that you enjoy its printing and assembly.

I have tried to simplify the design of the pieces to facilitate their printing and assembly.
In total there are 28 pieces.

The terrible video of the assembly!!... although it is quite simple and intuitive.

Print Settings

Printer Brand: Ultimaker

Printer: Ultimaker 2

Supports: Yes

Resolution: 0.2 mm

Infill: 10-30%

Filament: Fillamentum PLA Traffic Black and Rapunzel Silver
Notes:

First I will indicate the general print settings and then detail for each piece.

Nozzle: 0.4 mm

Layer Height: 0.2 mm
Line Width: 0.35 mm

Wall Line Count: 3
Z Seam Alignment: According to piece

Infill Density: 10-15%

Infill Speed: 60 mm/s
Outer Wall Speed: 20 mm/s
Inner Wall Speed: 35 mm/s
Top/Botton Speed: 30 mm/s

Support: Yes
Support Over Hang Angle: According to piece. Maximum limit of degrees for the minimum Supports.
Support Density: 15%
Support Interface Thickness: 0.6 mm
Support Interface Density: 65%
Use Towers: No

Printable parts:
IMPORTANT!! See photos for the print position of each piece.

  • V_LaserRifle_Body: Aprox.Time: 5 h 30 min. Material: 59 gr.
    Z Seam Alignment: Sharpest Corner / Hide or Expose Seam.
    Support Over Hang Angle: 82º
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserRifle_Grip: Aprox.Time: 5 h 30 min. Material: 58 gr.
    Z Seam Alignment: Sharpest Corner / Hide or Expose Seam.
    Support Over Hang Angle: 80º:
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserRifle_Cannon: Aprox.Time: 4 h 50 min. Material: 43 gr.
    Z Seam Alignment: Shortest / Hide Seam
    Support Over Hang Angle: 78º
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserGun_Rifle_L_Part: Aprox.Time: 4 h 30 min. Material: 42 gr.
    Z Seam Alignment: Shortest / Hide Seam
    Support Over Hang Angle: 85º
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserGun_Rifle_conector: Aprox.Time: 30 min. Material: 5 gr.
    Support: NO
    Recommended filament: Fillamentum Crystal Clear Iceland Blue.
  • V_LaserGun_Rifle_Join_Body_Grip: Aprox.Time: 10 min. Material: 2 gr.
    Support: NO
    Recommended filament: Fillamentum Crystal Traficc Black.
  • V_LaserRifle_A_Telescopic_sight: Aprox.Time: 9 h 30 min. Material: 100 gr.
    Z Seam Alignment: Sharpest Corner / Hide or Expose Seam.
    Support Over Hang Angle: 80º.
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserRifle_B_Telescopic_sight: Aprox.Time: 11 h 30 min. Material: 125 gr.
    Z Seam Alignment: Sharpest Corner / Hide or Expose Seam.
    Support Over Hang Angle: 73º.
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserRifle_C_Telescopic_sight: Aprox.Time: 1 h 30 min. Material: 16 gr.
    Z Seam Alignment: Sharpest Corner / Hide or Expose Seam.
    Support Over Hang Angle: 80º.
    Recommended filament: Fillamentum Traficc Black.
  • 2xV_LaserRifle_E_Telescopic_sight: Aprox.Time: 2 h 45 min. Material: 24 gr.
    Z Seam Alignment: Sharpest Corner / Hide or Expose Seam.
    Support: NO
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserRifle_Join_A_Telescopic_sight: Aprox.Time: 5 min. Material: 1 gr.
    Support: NO
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserRifle_Join_B_Telescopic_sight: Aprox.Time: 5 min. Material: 1 gr.
    Support: NO
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserRifle_Join_A_Telescopic_sight_Body: Aprox.Time: 20 min. Material: 2 gr.
    Support Over Hang Angle: 80º.
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserRifle_Join_B_Telescopic_sight_Body: Aprox.Time: 20 min. Material: 2 gr.
    Support Over Hang Angle: 80º.
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserRifle_A_Cannon: Aprox.Time: 7 h. Material: 63 gr.
    Z Seam Alignment: Sharpest Corner / Hide or Expose Seam.
    Support Over Hang Angle: 80º.
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserRifle_B_Cannon: Aprox.Time: 7 h. Material: 70 gr.
    Z Seam Alignment: Sharpest Corner / Hide or Expose Seam.
    Support Over Hang Angle: 80º.
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserRifle_C_Cannon: Aprox.Time: 5 h. Material: 44 gr.
    Z Seam Alignment: Sharpest Corner / Hide or Expose Seam.
    Support Over Hang Angle: 80º.
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserRifle_Join_A_B_Cannon: Aprox.Time: 20 min. Material: 3 gr.
    Support: NO
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserRifle_Cannon_Grip: Aprox.Time: 3 h. Material: 31 gr.
    Z Seam Alignment: Sharpest Corner / Hide or Expose Seam.
    Support Over Hang Angle: 80º.
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserRifle_A1_Stock: Aprox.Time: 4 h. Material: 35 gr.
    Z Seam Alignment: Sharpest Corner / Hide or Expose Seam.
    Infill: 30%
    Support Over Hang Angle: 80º.
    Recommended filament: Fillamentum Traficc Black.
  • V_LaserRifle_A2_Stock: Aprox.Time: 1 h. Material: 7gr.
    Z Seam Alignment: Sharpest Corner / Hide or Expose Seam.
    Infill: 30%
    Support Over Hang Angle: 80º.
    Recommended filament: Fillamentum Traficc Black.
  • 2xV_LaserRifle_Join A1_A2_Stock: Aprox.Time: 2 min. Material: 1 gr.
    Support: NO.
    Recommended filament: Fillamentum Rapunzel Silver.
  • V_LaserRifle_B1_Stock: Aprox.Time: 2 h. Material: 24 gr.
    Infill: 30%
    Support: NO.
    Recommended filament: Fillamentum Rapunzel Silver.
  • V_LaserRifle_B2_Stock: Aprox.Time: 3 h. Material: 35 gr.
    Infill: 30%
    Support: NO.
    Recommended filament: Fillamentum Rapunzel Silver.
  • V_LaserRifle_C_Stock: Aprox.Time: 7 h. Material: 66 gr.
    Support: NO.
    Post Procesing / Pause at height (change colour): 5.4 mm.
    Recommended filament: Fillamentum Rapunzel Silver and Traffic Black.
  • V_LaserRifle_Hitch_Grip: Aprox.Time: 16 min. Material: 2 gr..
    Infill: 30%
    Support Over Hang Angle: 75º.
    Recommended filament: Fillamentum Traficc Black.
    TOTAL: 28 Pieces.

Tags

propsblastergun80sshootingriflefillamentumseriesthingiverseultimakersnipertvseriessniperriflevvisitorslaserrifle