F1 Mclaren MP4-30 Steering Wheel Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
F1 Mclaren MP4-30 Steering Wheel Support.
- Rating
- 4 / 5
- Likes
- 7
- Downloads
- 53
- Makes
- 1
- Views
- 656
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
F1 Mclaren MP4-30 Steering Wheel Support.
Print instructions
Category: Vehicles Summary
F1 Mclaren MP4-30 Steering Wheel Support.
Print Settings
Printer Brand: Ultimaker
Printer: Ultimaker 2
Rafts: No
Supports: Yes
Resolution: 0.2
Infill: 15%
Filament: Fillamentum PLA Fillamentum Rapunzel Silver, Vertigo grey and Ruby Red.
Notes:
General print settings.
Nozzle: 0.4 mm
Layer Height: 0.2 mm
Line Width: 0.35 mm
Wall Line Count: 3
Activate “Outer Before Inner Walls”
Initial Layer Horizontal Expansion: -0.1
Infill Density: 15%
Infill Speed: 60 mm/s
Outer Wall Speed: 25mm/s
Inner Wall Speed: 35 mm/s
Top/Botton Speed: 25 mm/s
Support: Yes
Support Over Hang Angle: 70
Support Density: 15%
Support Interface Thickness: 0.6 mm
1xBase_SW
Post Procesing / Pause at layer (change colour): 39, 42 (Layer Height: 0.2 mm).
Recommended filament: Fillamentum Rapunzel silver, Vertigo Grey and Ruby Red.