Counting matching models…
Print 2 of these. Use 3 M4 heat set inserts on one and assemble with 3 M4x55-60mm screws. The v2 modifies the center hub of the spool to contain the Silica Gel holder here. https://www.printables.com/model/1125066-stronger-50mm-version
Here is a simple Hueforge for everyone of a Knight. The “original” Artpiece was AI generated and i put it in Hueforge If you own a simple printer like me who can only support one fillament at a time, use the custome gcode in your Slicer…
Round PLA cases for silicon moisture absorber orange one , with elastic bands sawn betwine cases . lower case should be made with 100% infill top covers can be made with 15% , 100 % is because when you try to put it on a spool you squeeze…
i made a wallmount for your fillament quick warning i am new to 3d designing and if there are problems with the design pls fix it if you can thx
Reduce the strain on your internal Filament tube with this handy spacer. Designed to mount to the original filament sensor holes on your Centauri carbon (you can even use the same M3 bolt). PRINT NOTES: This model must be printed on its…
This is Easythreed K2 and K1 spool holder for 1kg filament. It is created since every other available spool didn't meet my requirements. It is created so it can hold 1kg filament. Also it prevents tangling and unnesecary bending of…
Print at 0.28mm layer, 4 walls, 25% infill (if this model gets over 500 downloads i will make one for 3kg and 5kg)
I recomend using Visual studio code with the python plugin, feel free to ask any question in the comments. while i do write code i am by no means an expert so feel free to give tips and feedback. I Used Claude code for some parts of this…
This is a filament spool that allows for multiple widths of filament rolls to be loaded. It was designed with the primary purpose of allowing the loading of non “strapped” filaments that are untangled.
I used bolt 8x120mm, two M8 nuts and two 608zz bearings. Simply put bearings to each side of holder tube. Put M8 bolt through bearings and holder thread. On side of holder thread tighten the nuts against each other. You can see complete…
Thats pretty much all, Printed on normal PLA, no supports no nothing, A fast and stylish print, No magnet or other parts needed, snaps in place! Should fit all the prusa printers with an exposed extruder shaft of 5mm (MK3S/MK3 Plus and…
The wall-mounted filament spool holder for 3D printers is an excellent solution for saving space and making workspace organization easier. Its simple and functional design does not require support during printing, ensuring quick and easy…
Simple pulleys to guide filament using 608 bearings. Mounted using adhesive foam tape.
Filament Wallmount (can you use a rod of 40mm inside) Great resistance and low filament usage.
You may also liked some of these projects: https://wivry.gumroad.com ------------------------------------------------------------------------------------------------------------- If you like this model please hit the LIKE button. It helps…
Simple to print, easy to fit, and helps avoid the bowden tube snagging on the frame.
Compact, easy to print and not a centimeter bigger than it needs to be! the shelf braces are mounted with two screws each and designed to accept a 20mm pole as the “shelving surface". The pole should be a press fit, but there are screw…
Původní model: https://www.printables.com/model/858918-filamentspulenhalter-fur-prusa-mk-drucker-filament Autor: tom - https://www.printables.com/@tom_312332 Toto je asi ten nejlepší držák cívky, na který jsem narazil, ale docela mě…
Die Auffangschale fängt das Fillament welches beim Fillamentwechsel aus der Düse Kommt auf
Print however many segments and one end for each side and connect with 2x connector for each connection. Some supports required.
3D printer fillament holder stop for IKEA Hjalpa clothes rail. Only add a M6 nut and bolt.
Print 2 of these. Use 3 M4 heat set inserts on one and assemble with 3 M4x55-60mm screws. The v2 modifies the center hub of the spool to contain the Silica Gel holder here. https://www.printables.com/model/1125066-stronger-50mm-version
This is a quick and dirty atachment for the Prusa XL to have the fillament dryer directly atached to the 3030 rails. The STL is for the right side, mirror if you want it for the left side and want to use it with the power supply below.…
The CF rod fits snugly within the printed holder and is repurposed from a broken drone leg: 🔗 Holybro S500 V2 Spare Parts I won’t be listing anything from AliExpress, as I do not endorse purchasing from them. The model is designed to fit…
printed in abs 110 bed temp, 145 nozzle temp, 30 mm print speed. you can put this on either side if you do put it on the right side you need to have a longer bowden tube.
Here is a simple Hueforge for everyone of a Knight. The “original” Artpiece was AI generated and i put it in Hueforge If you own a simple printer like me who can only support one fillament at a time, use the custome gcode in your Slicer…
No instructions as this is a mod from another listing. The only thing I would recommend would be to us flat screws so the heads don't stick out and possibly interfere with the chain. If possible. See the other persons 45 degree cut photo.…
ROSA refill filament adaptor to bambulab spool with bbl cartboard tube Print in 0.28
I was bored by plane looking filament samples and added some sci-fi elements to them. I also modified the Lid.
SOVOL sv07 plus fillament guide This is a basic filament guide designed to keep the filament from getting tangled with the printhead. It also helps reduce friction when the extruder pulls the filament, which makes things run a bit…
Refillament spool for eSun refillament series filament, the spools have labels on them displaying the filament type on the spool. I have left a spool blank for custom logos etc. These are compatible with the Anycubic Ace Pro. I recommend…
dual gear extruder smaller hole besides extruder will need to drill a small bit because the hole will be too big and turn aroud the drill and will not grind i use arduino to spin the nema17 and the speed is adjustable
Note: the screw seems a little too tight when you first use it, but this is deceptive, just move it left and right a few times and it fits perfectly👍 (no force-> just moving step by step) Big Spool holder Anycubic Kobra S1 (print all 3…
This simple modified version of the RPI 3 mount has a hole on the bottom. Less filament to print without compromisring strengt Should allow for slightly better cooling
Discussions regarding fillament jams lead me to draw and print a really very simple fillament movement senzor. Bondtech gear movement indicator in the fillament jam situation does not show you, whether the fillament moves, the fillament…
I bought the Mellow Fillament buffer from aliexpress but could not find a bracket to mount it on the k1c . So i design a bracket to hold the Mellow Fly LLL Plus filament buffer…
this is a remix for a different bearing size 26 outer diameter 10 inner diameter 10 width also bracket for that and those basic red dual extruders from amazon
Undertable fillament holder by by H3DA Components with modified holes for IKEA Racka rods
This is a double filament spool holder designed as an upgrade for the Prusa Core One. This model is derived from the original prusa spool holder: i redesigned it in Solidworks so it can hold 2 spools. I used PLA for this so if you use…
I designed a few filament filters over the years some you screw open, some you snap together, some print in place etc. In the end they always had something annoying, because with frequent filament changes you had to unscrew a lot, or when…
2 versions: With spool support and only z axis guide! Spool holder for the Easythreed K7, using the model ( https://www.thingiverse.com/thing:4870760 ) as a base. What I did was create a new adapter for this part; the fit is perfect. It…
Filament wiper mold for 3d printers. In the pictures (Blue) is V1. black is V2 There's many off the shelf parts you can use with quite large or are fiddly to install etc. My printer uses picture frame clips that are abundant and cheap and…
This is our new airless basketball model designed for the amazing Fillamentum PEBA filament! This airless basketball filament has one of the best bounces we have tested, and also has amazing durability as well. Since the Kimya PEBA-S…
Concluding the 10 Years celebration of MiniWorld3D celebration, we have created a series based on gratefulness to brands that have been in our journey through this time, an acknowledgement to everyone who has been involved at some point…
I shortened the original to allow me to mount this spool holder inside the Zero G enclosure.
It fits my MK3 with the overture filament wheels. I've printed with it and it works great.
This is a simple filament swatch. It has nothing special. It is designed to work with the HEMA labels (38 x 19 mm). I printed it on my Bambu Lab A1 with issues (as expected for such a simple model) Feel free to change and make it how you…
Gedruckt mit PLA, 25% Infill, Füllmuster, 4 Wand Linien. Die Auflage für das Fillament bildet ein 16mm Kabelkanal mit einer Länge von 360mm. Alle Teile sind einzel Druckbar. Die Wandhalterung kann auch ohne die Fillamtenhalterung genutzt…
It works by inserting a one-inch PVC pipe cut to length to create the complete model. You place the PVC on top and then slide on your roll of filament. It uses a one-inch PVC pipe, cut to length.
this is a simple case of i love the ubbi connector and i have a basic optical sensor and i needed them together. so rather then start from scratch. i decided to cut paste and fix these two together. my first post only because maybe…
Fits to the front of your Prusa MINI / MINI+ Helps you keep your desk / enclosure clean You can scrap directly from print sheet Recycle sign at the front - everybody knows that you are thinking about nature even when printing plastics…
This is a very BETA model. I drilled a hole for the power for the filament drier (because I forgot to model it!). I used threaded inserts for the panel side. You need longer screws. Holes are in place to glue magnets but I've not done…
Simple Redesign of the filament dryer temps and time for the Creality Space PI Dryer. Can be printed without AMS or CFS if you pause and swap the filament on the text layer.
Creality Ender 3 V3 SE fillament guide that mounts on top of the printer, instead of the stock spool hanger. Optimized for printing on the side of the guide cutout, probably would make more sense to optimize the model to print on the side…
I needed a filament guide that had an easy feed/entry I used a "PC4-M10 Male Straight" Pneumatic fitting (you can search for them online at your favorite store) I printed the cap for aesthetics. Fusion 360 file included. Print…
Round PLA cases for silicon moisture absorber orange one , with elastic bands sawn betwine cases . lower case should be made with 100% infill top covers can be made with 15% , 100 % is because when you try to put it on a spool you squeeze…
i made a wallmount for your fillament quick warning i am new to 3d designing and if there are problems with the design pls fix it if you can thx
Reduce the strain on your internal Filament tube with this handy spacer. Designed to mount to the original filament sensor holes on your Centauri carbon (you can even use the same M3 bolt). PRINT NOTES: This model must be printed on its…
A remix of the referenced model, just without the text. I did one with an inset window for fun as well.
This is Easythreed K2 and K1 spool holder for 1kg filament. It is created since every other available spool didn't meet my requirements. It is created so it can hold 1kg filament. Also it prevents tangling and unnesecary bending of…
Print at 0.28mm layer, 4 walls, 25% infill (if this model gets over 500 downloads i will make one for 3kg and 5kg)
I recomend using Visual studio code with the python plugin, feel free to ask any question in the comments. while i do write code i am by no means an expert so feel free to give tips and feedback. I Used Claude code for some parts of this…
This is a filament spool that allows for multiple widths of filament rolls to be loaded. It was designed with the primary purpose of allowing the loading of non “strapped” filaments that are untangled.
You can put a long thread and 2 nuts through the center to hold it together or glue it together I guess The screw holes on the base of the bracket line up with the core one nylon rivet holes for the top cover, you can insert some M3x10…
This is a remix of Cristian’s original Ender 7 filament sensor relocation bracket. I modified the bracket by cutting away the Bowden bracket section. This allows it to be used together with the Creality CR6 Filament Sensor Mount shroud.…
A filament holder for Sunlu refillable spools only. It can go wherever your filament can go, inside your dryer, inside your dry box. It is designed for optimum drying and makes use of the holes in the spool. If you want to add a…
This is an original design I made specifically for Fillementum CPE HG100, though it should work in any food safe filament. The lower right corner is meant for a glass carb cap. STEP and F3D files included so folks can edit it themselves.…
Five removable (sliding) dryboxes in a row on Ikea Lack Enclosure. Use only .3mf files - no .stl needed 15.11.2019 added clip Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Filament: doesn't matter PLA Notes:…
Simple fillament spool roller - fast print, easy to put together. Bearings, screws and nuts needed. Two wides included. One to fit standart spool wides and one to fit Fiberflex spool. Pieces to print: part A - 4pcs part B - 2pcs (wide or…
Hey guys . I saw some ways of mounting rails to my walls for the spools i had but i thought every signle one was way flimsier than i imagined. So i designed this one , its pretty standart and im using 15mm hollow aluminium rods and it…
I wanted better access for filament cutter when I changing filament on Prusa Mini so I added nut to body. Just insert whole filament cutter with nut side to extrusion and rotate to fix it in place. Other files (top piece) and guide are…
I decided to finally upgrade the fillament spool compartment of my LACK ensclosure, and i wanted to have as universal system as possible. Asside from the great Wider and narrower remix spool holder , ( that is of course a remix of a…
Hi there - i was looking for a robust and good spool holder to mount on top of my Ender 3 v2 I recommend my filament guide here https://www.thingiverse.com/thing:4712122 to fit in front of the spool holder. There was some but was really…
silica gel box + fillament holder. this is a build made to hold a 3d printer fillament in a cornflakes box. the fillament is placed over two rollers with implanted bearings. three boxes hold alot of silica gel around the fillament. Print…
Same as original except may need support for where the ptfe connects. I used snug support, detachable xz spacing and increaded xy spacing to 80%.
Filament rubbing not only increases friction but damages both the filament and the hole the filament is routed through this guide ads a layer of protection.
Bracket for mounting fillament sensor and supporting cablemess on the gantry of the CR and Ender series printers. Enjoy Print instructions Print it upside down with legs in the air. Enable "Support everywhere" so the small clamp will be…
what you need: 2X Fillamnet stand 1X about 2 cm dameter wood or iron rod 1X ikea create
Filament holder for PM spool. ( https://www.filament-pm.cz/ ) Fusion360 file included if you want to modify it. Prusa i3 MK3 0.2 20 infill PLA no supports
Use some rubber at the bottom for minimal sliding, you can also fill the bottom with sand if you use the linear infill and for example use filament change to pause and fill the model
This is my moder glasses holder. I put focus on a tiny, compact and modern design
Filament Roller With Bearings Parts like bearings,screws,nuts,washers on 2d layout
![Fillament filter [Read Description, print at 105% most of the time]](https://media.printables.com/media/prints/73cbbdd4-bfeb-44ad-9a39-afd9b59f497e/images/10763150_65c29aa0-7a47-430c-9e93-eb207d5c9f6e_03d7efa7-1cd7-4fea-91bf-66e34c6dad2e/20250927_163525.jpg)
