1 / 11

Fillament Drybox

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Filament Drybox comprised of various other designs as well as some personal designs

Updated at source: Apr 28, 2024

Model information

Combined a bunch of others drybox designs to create my existing setup.

List of Purchased Parts:

EZY Drybox 18L/19Qt from HomeDepot
Metal Rod 5/16 x 36'' for Filament Spools also from Home Depot. I have a fine thredded rod but a smooth one woould be ideal.
PTFE Connectors from AliExpress
- Used a total of 9 PTFE connectors on my setup.
PTFE Tube from AliExpress
- Got the 2m since its cheap. Only used a little less than a meter in total.
Humidity/Temp Sensor from AliExpress
M3 Hardware Hex Screw from Aliexpress
- Got the M3 282 piece kit.
- 20x M3 3x10 screws (All used for the filament guides on the drybox and on temp sensor on the drybox)
- 6x M3 3x20 Screws (Used on sillica case, 3 screws each)
- All screw used with M3 Hex nut
Fillamet Roll Bearings from AliExpress
- 4x 608zz bearings for each roll, 16 total in drybox
Sillica Gel from AliExpress

List of Printed Parts:

Lack_Guide_Top/Bottom - Remixed Rimbalin's filament guide to be able to screw PTFE connector into it
- Printed QTY: 1
Bearing_Support - Used ReaperOfThresh's Bearing Support to better hold the spools in place while on the bearings
- Printed QTY: 16
Roll_Base - Used nameek's Filament Base to hold the rods that the spools are placed on.
- Printed QTY: 2
DryBox_Guide - Used Max Mustermann's filament guide to feed filament out of drybox and back in when roll is not in use.
- Printed QTY: 16
I designed a rough silica case, which is what im still using. Biggest flaw is where the screw holes are. Haven't had time to redesign.
- Printed QTY: 4
I designed the sensor holder
- Printed QTY: 1