Fillamentum NonOilen profile (Beta) for Bambu Lab X1C
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Unofficial material profile for Bambu Lab Studio or Orca Slicer prepared and tested on Bambu Lab X1 Carbon 3D printer.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 176
- Makes
- 0
- Views
- 1,181
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Neither Bambu Lab Studio nor Orca Slicer contain a material profile for Fillamentum NonOilen, a great 100% recyclable material. (More info about this material here.)
► I have prepared a material profile based on PLA and for use on Bambu Lab X1 Carbon with AMS (material station) and 0.4mm nozzle using Calibration procedures in Orca Slicer:
- Temperatures are reduced (NonOilen needs to be printed lower than PLA to avoid degradation!).
- Max. volumetric speed is also reduced (however, I welcome further experiments here).
- I left the bed temperatures as for PLA, it depends on your treatment (I print on Cold plate with 3DLAC spray).
- The Flow ratio for me did not need to be changed against PLA (both calibrations from Orca Slicer sit at 0.98).
- Pressure advance is slightly changed (to 0.01).
- For the material density I base it on the manufacturer's datasheet (1.05 g/cm3).
- The rest is left as for Generic PLA for V1.
Use at your discretion, I welcome your practical experience with NonOilen.
Tip: Make sure to turn off Flow calibration before the start of printing on Bambu Lab X1C unless you want it to overwrite this profile values.