1 / 3
V-Minion EVA 3 EBB36 Mount Orbiter 1.5
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Combined the Orbiter 1.5 Mount from @iainwlg with the EVA 3.0 chain mount for 10x15 drag chains from @Squirrelbrain.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 70
- Makes
- 0
- Views
- 852
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- Print is on the back with supports for the drag chain mount.
- Delivered brass standoffs which came with the EBB36 board need to be trimmed by around 1mm. I did this with an extender slider.
- Use heat inserts M3x4.6x4 from the back for mounting the toolboard with M3 countersunk screws.