C270 Camera Angled Extrusion Mount for Prusa Mini+
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Logitech C270 articulated arm mount that attaches to Mini+ aluminum extrusion at a 45 degree angle.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 46
- Makes
- 1
- Views
- 354
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of the articulated arm mount with cable clips found here, but instead of mounting to the heatbed https://www.printables.com/model/175456-c270-camera-mount-for-mini-heatbed-corner, this connects to the 30x30 aluminum extrusion using a modified tabbed end of the rigid arm found here: https://www.printables.com/model/247533-logitech-c270-mount-for-prusa-mini
Printed in PLA at 0.20mm with 15% infill. I printed with organic supports everywhere but that may not be necessary.
As with the original arm, mounting to the C270 requires a M3x20 screw and a M3 hex nut and the arms each need a M3x16 screw and M3 hex nut.
Ensure that you have enough clearance from the heat bed once installed on the extrusion.