C270 Camera Angled Extrusion Mount for Prusa Mini+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Logitech C270 articulated arm mount that attaches to Mini+ aluminum extrusion at a 45 degree angle.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 354
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the articulated arm mount with cable clips found here, but instead of mounting to the heatbed https://www.printables.com/model/175456-c270-camera-mount-for-mini-heatbed-corner, this connects to the 30x30 aluminum extrusion using a modified tabbed end of the rigid arm found here: https://www.printables.com/model/247533-logitech-c270-mount-for-prusa-mini
Printed in PLA at 0.20mm with 15% infill. I printed with organic supports everywhere but that may not be necessary.
As with the original arm, mounting to the C270 requires a M3x20 screw and a M3 hex nut and the arms each need a M3x16 screw and M3 hex nut.
Ensure that you have enough clearance from the heat bed once installed on the extrusion.