PTFE-tube 60° chamfer tool by printschnitzel.at
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.10 – €0.12 net (excluding VAT)
For file: Scaled 103%, brim added, includes layer change gcode and fixture supports. Based on 15% quality PLA profile. / guide-7_015mm_pla_mk3s_8m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.11 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 7.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Tool for cutting the 60° cone at the inside of PTFE tubes especially for E3D V6 Hotend e.g. for my Prusa MK3
- Rating
- 4.5 / 5
- Likes
- 222
- Downloads
- 609
- Makes
- 21
- Views
- 6,181
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Print instructions
BOM:
printed parts:
1xbody body-7.stl
1xguide guide-7.stl
1xbolt fixture bolt_fixture-7.stl
1xlogo logo-7.stl
other parts
1x9mm stanely blade
1xbolt M3x10mm DIN 912
1xbolt M3x6mm (or 8mm) DIN 912
1xM3nS nut DIN 562
Details
Print the parts as orientated in the stl files.
Guide
Add an M600 to insert the blade.
How I do it:
-Print with 0.15 layer hight
-Add M600 at z=1.4
I do this at prusaslicer by adding {if layer_z ==1.4}M600 Y200; Color change {endif} to "after layer change g-code" at printer settings->custom g-code
When inserting the blade: Make sure the blade is equal with the last printed layer so it does not hit your nozzle!
Bolt Fixture
Use supports
Body
Nothing to say, just print it :)
Logo
You don't need this but it gives your tool a nice touch
Use the filebody_with_logo-7.zip.amf so you have it set up right