1 / 1
Rod/Tube holder for IKEA Myllra — image 1

Rod/Tube holder for IKEA Myllra

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Parametric (shelf thickness and rod diameter can be changed in .scad file). Side and corner variants.

Rating
0 / 5
Likes
1
Downloads
13
Makes
0
Views
137
Reviews
0

Updated at source:

Model information

Category
Bedroom
License
Creative Commons — Attribution

Snug fit on the changing table, doesn't wobble at all. Can be made to fit other furniture (“wall” parameter in .scad file = thickness of shelf). The “OD” and “ODt” parameters control the rod diameter and tolerance, respectively. There are three variants. The straight version (no photo, sorry) clips to the side, but I found it too unstable for my purpose. After some testing I'll be using the stronger variant, printed with PETG or ABS. Maybe somebody else has a use for this (e.g. as a pen holder or small vase).

The stl files are rendered for a 6 mm pipe held in place by friction, which I use as a mobile holder. The base is quite stable, the shown corner variant easily holds 1.5 kg.
PLEASE TEST PROPERLY UNDER LOAD ! SEVERE INJURY CAN RESULT IF SOMETHING DROPS ON YOUR BABY. USE AT YOUR OWN RISK.

Tags