Rod/Tube holder for IKEA Myllra
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric (shelf thickness and rod diameter can be changed in .scad file). Side and corner variants.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
Snug fit on the changing table, doesn't wobble at all. Can be made to fit other furniture (“wall” parameter in .scad file = thickness of shelf). The “OD” and “ODt” parameters control the rod diameter and tolerance, respectively. There are three variants. The straight version (no photo, sorry) clips to the side, but I found it too unstable for my purpose. After some testing I'll be using the stronger variant, printed with PETG or ABS. Maybe somebody else has a use for this (e.g. as a pen holder or small vase).
The stl files are rendered for a 6 mm pipe held in place by friction, which I use as a mobile holder. The base is quite stable, the shown corner variant easily holds 1.5 kg.
PLEASE TEST PROPERLY UNDER LOAD ! SEVERE INJURY CAN RESULT IF SOMETHING DROPS ON YOUR BABY. USE AT YOUR OWN RISK.