Raiser for Bambu Lab P1P AMS Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raiser for original AMS Holder - If you have printed the original holder from bambulab and don't want to waste it
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 232
- Makes
- 0
- Views
- 2,531
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a very simple model that elevates the original AMS Bambu Lab holder.
I created it because I printed the holder from the BambuLab website and it turned out that the extruder cable rubs against the bottom of the AMS. I didn't want to waste the material and print the whole new holder - so my idea is to glue the raiser.
You need to print 2 identical raisers vertically preferably using brim, 0,2 layer height, 3 wall loops and 15% infill.
Assembly consists in gluing the holder to the raiser using ordinary CA glue :)