1 / 5
Anycubic wash&Cure 2.0 Resin Vat Drainage Holder unfinished — image 1
1 / 5

Anycubic wash&Cure 2.0 Resin Vat Drainage Holder unfinished

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

model is an adapter to hold a resin drainholder for a anycubic wash and cure 2.0, that i never got to finish

Rating
0 / 5
Likes
3
Downloads
18
Makes
0
Views
156
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

I designed this adapter/holder that you can add to the top of your Anycubic wash&cure 2.0. 

Hardware and tools you need:

How to set up:

  • Take off the top plastic part
  • drill out both exposed holes with the 4.3mm drill about 20mm deep
  • tap some threads with the tapping drill (a bit less deep than the hole you drilled to prevent it from snapping)
  • screw in the adapter part with your M5x30 screws
Vatholder: 
  • put your heatinserts into the back part 
  • screw in your vatmount with the M3 screws

 

 

Tags