Remixed - PwnCNC Dust Boot - Vinyl Cutter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed the PwnCNC Dust Shoe to hold Amazon Vinyl Cutter. If using the Makita router you'll also need this if you do…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 0
- Views
- 431
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed the PwnCNC Dust Shoe to hold Amazon Vinyl Cutter.
If using the Makita router you'll also need this if you do not already have it: https://cdn.thingiverse.com/assets/a7/76/bf/03/f6/Collar-65a.stl
This is the one I used from Amazon. https://www.amazon.com/gp/product/B0794T4Q9Y
I sourced a spring from my local Ace Hardware
I used M3 brass inserts and M3 bolts on the back just like you would for the dust shoe itself.
Printed upside down at layer height of .24 and 35% infull - full supports
Be careful not to forget the cutter is there and get your hand anywhere near it... sure not a table saw accident but they are sharp and does not take much to cut your hand up.
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: PolyMaker PLA
Category: 3D Printing