Jupiter lamp mounting adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket to connect the Jupiter lamp (https://www.thingiverse.com/thing:2747956) to an Ikea lamp base
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Bracket to connect the Jupiter lamp (https://www.thingiverse.com/thing:2747956) to an Ikea lamp base (in my case an INGARED lamp, but I'm fairly sure any small-fitting lamp would work)
It is designed to be screwed down with the typical screw thingy that comes with the lamp, and then you can add the bulb and click in the Jupiter. Snaps right into place.
Note: because of potentially high temperatures, preferably print in ABS/PETG instead of PLA.
It uses only about 50cm of filament, so no need to swap rolls; just cut off a short piece of filament ;)
Category: Other