Threaded Bearing Holders remixed for Ikea 465+ 10.6L food container drybox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is remix of https://www.thingiverse.com/thing:4246377 and https://www.thingiverse.com/thing:4570340/remixes. With…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 530
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is remix of https://www.thingiverse.com/thing:4246377 and https://www.thingiverse.com/thing:4570340/remixes.
With the remix bearing holder by 3opaH you don't need to buy any nuts as the bearing holder is threaded. Because they were to wide to accommodate two full size 1kg prusa filament spools in the Ikea 365+ 10.6l containers, I remixed the bearing holder to accept a bearing on both sides, so you don't need two bearing holders in the middle of the rod. I also slimmed down the other bearing holders. You need to print 12 of the slim bearing holders (file Pos2) and 2 of the center bearings (file Pos6).
Print the center holder with supports, because the inner ring is not flush with the outer ring. Otherwise the print will fail.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Prusament PLA Galaxy Black
Notes:
Print the center holder with supports, because the inner ring is not flush with the outer ring. Otherwise the print will fail.
Category: 3D Printer Accessories