Heavy duty 2.5mm plexiglass bracket (no glue or bolts)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a beefy plexiglass bracket for when you need something other than the wimpy ones available.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 95
- Makes
- 0
- Views
- 553
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
I decided to build an enclosure out of plexiglass. All the 2.5mm brackets were incredibly small, wimpy and not very confidence inspiring.
So I rolled my own.
The height is to be adjusted depending on how long you need the bracket.
I made the slots in the brackets 2.35mm wide which results in a very nice friction fit. This removes the need for glue or bolts to holt the structure together which results in easy disassembly. Not that you can't further secure them if you see fit.
There are two brackets. Dimensionally they are identical. I just added some fillets to “v2” for aesthetic purposes.
The non-filleted version has a little bit more surface area for bed adhesion but I still recommend printing with a brim.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.25
Infill:
0%
Filament: PLA+
Notes:
I suggest using a brim, and while it's not 100% required it helps given the small surface area of the print touching the build plate. Even more-so with the filleted version.
3-4 walls
Infill is not required. These things are plenty strong with only 3-4 walls.
Category: DIY