1 / 3
Keycap Puller: Print-in-Place
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Single printed tool to remove those stubborn keycaps!
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 486
- Makes
- 8
- Views
- 1,364
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Keycap Puller: Print-in-Place
---------------------------------------------------------------------------------
About:
- Print-in-place keycap puller that safely removes keycaps from a mechanical keyboard
- Inspired by Nikoraasu's keycap puller
- Printed with NO supports, as the file has built-in supports
- Printed in less than 25 minutes on a standard MK3S
---------------------------------------------------------------------------------
Printing:
- Tested with PLA and PETG
- Disable supports
- Enable bridging
- 3 perimeters
- 15% infill
- 3mm brim recommended
---------------------------------------------------------------------------------
Post-Processing:
- To remove the built-in supports, I used a stiff thin board to slide between the two halves.
- Use clippers to remove the excess filament
---------------------------------------------------------------------------------
Design Process:
