1 / 1
Prusa Mendel i2.5 X-axis Idler and Motor Ends — image 1

Prusa Mendel i2.5 X-axis Idler and Motor Ends

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I'm upgrading an old Mendel i2 to something closer to an i3. We'll call it i2.5

Rating
0 / 5
Likes
0
Downloads
23
Makes
0
Views
190
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Inspired by current i2/i3 x Driver and Idler designs. Hacked together crudely with apologies to the precision work by the Prusa team ;) We can only afford precision guesswork here.


Important Notes:

  • Spacing between Z-axis guide rod and screw is different from modern designs. This is for the old Mendel design (https://reprap.org/wiki/Prusa_Mendel)  with spacing of 30mm (wider than modern design)
  • Idler and motor side Z-axis guides have cutouts sized for LME8UU (European) ID8, OD16, L25 linear bearings … but should be workable for US LM8UU - probably, holes will be oversized. See https://reprap.org/wiki/Linear_bearing
  • x-axis guide rod spacing should be the same as modern i3 design - 45mm
  • T8 lead screw used for z-axis, note 3.5x mounting holes per side
  • Idler end just has a plain thru hole for M8 rod

Use case:

Tags