12864 LCD Graphic Smart Display Case for Anycubic 4MAX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an upgrade I designed for the Anycubic 4MAX 3D Printer. It adds a better viewing angle.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 66
- Makes
- 2
- Views
- 518
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is an upgrade I designed for the Anycubic 4MAX 3D Printer. It adds a better viewing angle, and you can insert/remove the SD Card without opening the door. The 4MAX is an awesome 3D printer, but I was having interference issues with the card reader/graphics board at its original location where the board could not read the SD Card. After lots of troubleshooting, I discovered that moving the graphics controller away from the enclosure solved my problem. I suspect other 4MAX users are having similar issues such as the printer stopping before finishing, erratic xy movements or even scrambled display. I also added spacers between the screen and the main board to eliminate flexing when mounting. Please post your makes. Thanks
Update-12/30/18
Added (12864_LCD_Graphic_Smart_Display_Controller_Board_Case_4MAX_v2). If you're having trouble bridging the SD Card slot, use this version. It has a modified SD Card slot opening with little to no bridging required.
Print Settings
Printer Brand:
Anycubic
Printer:
Semi-closed 4Max
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20%
How I Designed This
All parts were designed in DesignSpark Mechanical.
Category: 3D Printer Accessories