Suction hood for Stepcraft 2/600 mill with Kress 800kfme
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a suction hood for my Stepcraft 2/600 mill with a Kress 800kfme. The design is for a 25mm suction hose. The…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a suction hood for my Stepcraft 2/600 mill with a Kress 800kfme.
The design is for a 25mm suction hose.
The orange plate is the Stepcraft plate holding the mill. This doesn't need to be printed ;)
You will need
- a 25mm suction hose of course.
- 1x M5x30mm
- 1x M5 Nut
- 16x Neodym magnets 3x5mm (height x diameter)
Update 08.01.2017:
===========================
- Added a suction shoe which can be mounted on top of the "Saugstutzen" in order to make a suction funnel for manual working with the suction.
Update 05.09.2016:
- CorrectedI the wrong place for the pin of Oberteil_V2 which is going into the plate of the mill.
- Modified the brush part in order to be able to use a strip brush (I was defenitely not good in glueing in the brush)
- Added a clamping part for the strip brush. This part is very tight in order to hold the brush in place. I ordered this brush: http://www.enobi.de/waermedaemmung/buerstendichtung/mi0003 With 30mm brush hairs.
I also added some holder for the cable of the KRESS mill to the suction hose (mine is ID/OD 25/28mm) and also holders for the 40mm tubes which are installed in my housing.
Print Settings
Printer:
CTC Dual
Rafts:
No
Supports:
Yes
Resolution:
0,2
Infill:
20%
Notes:
It should be easy printable.
Support is only needed in part Oberteil\_V2 for the bolt head.
I printed this in PLA Orange now as the colour fits better to the Stepcraft.
This can be printed from all materials.
How I Designed This
Designed with solid works
Category: Hobby