Cover for Mengshen bike alarm remote (FreeCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protects the alarm remote's buttons from being pressed unintentionally.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 63
- Makes
- 2
- Views
- 341
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These alarms for bikes etc. are quite popular among velomobile riders.
Inside one's pocket the buttons of the remote are prone to be pushed unintentionally. So I've created a cover to prevent this.

(Yes, the master sketch is not really needed. When I started I thought it might be helpful and when finished I was too lazy to remove it.)
Printing
PLA, 0.4 mm nozzle, 0.2 mm layer height, 3 perimeters, 6 bottom / top layers, arachne, lightning infill, brim, no supports

If you need more than one cover you may print them in different colors or add some text in your favorite slicer.
