Cover for Mengshen bike alarm remote (FreeCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protects the alarm remote's buttons from being pressed unintentionally.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 63
- Wydruki
- 2
- Wyświetlenia
- 341
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These alarms for bikes etc. are quite popular among velomobile riders.
Inside one's pocket the buttons of the remote are prone to be pushed unintentionally. So I've created a cover to prevent this.

(Yes, the master sketch is not really needed. When I started I thought it might be helpful and when finished I was too lazy to remove it.)
Printing
PLA, 0.4 mm nozzle, 0.2 mm layer height, 3 perimeters, 6 bottom / top layers, arachne, lightning infill, brim, no supports

If you need more than one cover you may print them in different colors or add some text in your favorite slicer.
