Prusa MINI Timelapse Method
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hi everyone! I want to share my method to create some cool Timelapses.
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 85
- Makes
- 2
- Views
- 2,238
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Hi everyone!
I want to share my method to create "acceptable" Timelapses.
Currently, i'm not able to create those brilliant/perfect ones that we can see all over the internet but i hope to soon find the good configuration.
With this print, you can attach a limit switch (+/- 12.8 x 6.7mm) at the beginning of the X-axis and either use Octolapse ( I tested it and it works without problems) or custom G-code after layer change.
Here is a video of my experiment:
Here is the custom G-code that I used:
ATTENTION!
Please test this before launching an entire print. This must be configurated with caution as may cause unwanted collisions!
Copy and paste on Custom g-code under Printer Settings.
;AFTER_LAYER_CHANGE
G1 X10 Y180 F{travel_speed*60} ;Move away from the print before activation movement
G4 S0 ;Wait for move to finish
G4 P200 ;Wait for 200ms
G1 X5 F1000 ; Activation movement
G4 S0 ;Wait for move to finish
G4 P100 ;Wait for 100ms
G1 X10 Y180 F{travel_speed*60} ;Back movement
G4 S0 ;Wait for move to finish
G4 P100 ;Wait for 100ms
;[layer_z]
Print instructions
*Print without supports and then break the tabs designed in place