Prusa MINI Timelapse Method
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi everyone! I want to share my method to create some cool Timelapses.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 85
- Wydruki
- 2
- Wyświetlenia
- 2238
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Hi everyone!
I want to share my method to create "acceptable" Timelapses.
Currently, i'm not able to create those brilliant/perfect ones that we can see all over the internet but i hope to soon find the good configuration.
With this print, you can attach a limit switch (+/- 12.8 x 6.7mm) at the beginning of the X-axis and either use Octolapse ( I tested it and it works without problems) or custom G-code after layer change.
Here is a video of my experiment:
Here is the custom G-code that I used:
ATTENTION!
Please test this before launching an entire print. This must be configurated with caution as may cause unwanted collisions!
Copy and paste on Custom g-code under Printer Settings.
;AFTER_LAYER_CHANGE
G1 X10 Y180 F{travel_speed*60} ;Move away from the print before activation movement
G4 S0 ;Wait for move to finish
G4 P200 ;Wait for 200ms
G1 X5 F1000 ; Activation movement
G4 S0 ;Wait for move to finish
G4 P100 ;Wait for 100ms
G1 X10 Y180 F{travel_speed*60} ;Back movement
G4 S0 ;Wait for move to finish
G4 P100 ;Wait for 100ms
;[layer_z]
Print instructions
*Print without supports and then break the tabs designed in place