Folger Tech FT-5 170mm Alignment Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a tool for building the Folger Tech FT-5. It calls out to space the two upper levels 170mm apart. Had no way of doing it. My dial calipers only went to 6" or a little over 152 mm so I just made my own tool to do the job. Nice to have a 2nd 3D printer handy!! I used Tinkercad. This is my first time using it. It only took about 20 minutes to design.
Note: I had them measured and off of my Rostock they came out 173.23 mm. Should be close enough to work. I will be fixing the length problem and uploading it in a few days.
I fixed the STL! It was Tinkercad that didn't keep the 170mm dimension. I used 123D Design to tweak it in tolerance. Also made the STL 'Fine' when I saved it so it looks better. Maybe...
One more thing. Print 2. It works better that way.
Print Settings
Printer Brand:
SeeMeCNC
Printer:
Rafts:
No
Supports:
No
Resolution:
.30
Infill:
20
Category: 3D Printers