1 / 13
SCALEPRINT RD-11 STONE DORMER FOR 45 DEGREE ROOF 00/HO SCALE — image 1
1 / 13

SCALEPRINT RD-11 STONE DORMER FOR 45 DEGREE ROOF 00/HO SCALE

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hello all Still into the archives and still in the area of roofs. This thing is for a dormer for a 45 degree roof, and…

Rating
0 / 5
Likes
8
Downloads
78
Makes
0
Views
324
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Hello all

Still into the archives and still in the area of roofs. This thing is for a dormer for a 45 degree roof, and for a building made from stone. There are 2 roof patterns the one that is shown in the photos and a second one that is called Victorian.

The brick 45 degree and the 60 degree roof style will follow

Print Settings

Printer:

ORDBOT HADRON

Resolution:

0.2 NOZZLE .1 LAYER HEIGHT

Notes:

Being as I am so that the surface of the roof tiles was parallel to the X/Y axis's I printed them with the bed at about a 7 degree angle,( photo below ) to give a flat not a stepped surface as would normally be printed when the top surface is at an angle.

Most people cannot do this so printing on a normal bed you will have to clean the top surface of the roofs.

Or you could put the roof tiles at an angle so the tile surface is in line with the X/Y axis's

Post-Printing

BED AT 7 DEGREES FOR PRINTING ROOF

Category: Buildings & Structures

Tags