SOUTH BEND LATHE MODEL 9C ( 1937-1940 ) CHANGE GEARS PART 1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the start of a set of change gears for cutting threads on an 8TPI imperial leadscrew lathe these was designed…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 62
- Makes
- 0
- Views
- 413
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the start of a set of change gears for cutting threads on an 8TPI imperial leadscrew lathe these was designed for a South Bend lathe model 9C.
The teeth have 14.5 degree pressure angle
The gear has a DP of 18
The module is 1.411
True involute form
are 3/8" wide with a centre bore of 0.5625" key is 1/8"wide
Will put up in sets of 5
If you have a need for any other gears please let me know and I can look at it for you.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
I used a 0.3
Infill:
100 %
Notes:
the centre hole will print under size so will need cleaning out to fit the shafts
and of course clean up around the teeth.
Category: Machine Tools