SOUTH BEND LATHE MODEL 9C ( 1937-1940 ) HALF NUTS CAM LEVER
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement part for a South bend lathe model 9C that I just received, this part was missing so made a…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 334
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement part for a South bend lathe model 9C that I just received, this part was missing so made a replacement out of ABS PLA may be stronger.
I made it in 2 halves and glued them together with ABS juice.
The photo's are some I found on the net, as I did not have one to copy.
Works fine as there is not much load on the lever.
I will have other pieces for this same lathe, change gears, cross slide nut, top slide handle,
Plus whatever I need to replace because it is missing or worn out.
My lathe was made between 1937 and 1940.
Post-Printing
clean up
Depending on your printer will need minimal clean up on the dia that fits into the hole in the apron
Category: Parts