1 / 3
OpenMower survey GPS antenna mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Internal mount for survey GPS antenna for the open mower project.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 448
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is an internal mount for the ardusimple survey GPS antenna for the open mower project. Fits in a YardForce classic 500 mower.
- Saw off a 5/8" UNC screw for antenna
- Use M4 screws for mounting.
- antenna_distance = 0,32
I added a thin EPDM rubber washer around the screw (see picture). I recommend to cut a M4 thread in the existing pins in the mower case.
- PLA, or better PETG
- Nozzle diameter 0,4
- Layer height 0,2
- Infill 20%