1 / 3
OpenMower IMU mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
mount for Pololu AltIMU-10v5 for the OpenMower project fitting in a YardForce classic 500 mower
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 323
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is an mount for the Pololu AltIMU-10v5 for the open mower project. Fits in a YardForce classic 500 mower.
There is one mount with IMU x pointing in forward direction and on with IMU y pointing in forward driving direction.
- Use M3 for the clip
- Use M4 screws for mounting to case
I recommend to cut a M4 thread in the existing pins in the mower case. No need for cutting M3 thread in the base plate for the clip
- PLA, or better PETG
- Nozzle diameter 0,4
- Layer height 0,12
- Infill 40%