MK4 Nozzle tray for Original Enclosure (left side)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.07 – €1.31 net (excluding VAT)
For file: Nozzle_holder_0.4n_0.3mm_PETG_MK4_57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.19 excluding VAT (range midpoint).
- Weight reported by the author
- 21 g
- Print time reported by the author
- 57.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Screw in nozzle holder for the MK4 nozzles. To be screwed (M3x8) in on the left side of the original Prusa enclosure.
- Rating
- 4.714 / 5
- Likes
- 33
- Downloads
- 145
- Makes
- 8
- Views
- 1,322
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
A simple nozzle tray to hold the .25, .4, and .8 MK4 nozzles.
Optimized to attach with M3x8 screws on the left side in the original PRUSA enclosure.
Printed upside down with 0.4 nozzle PETG on the textured metal sheet of a MK4.
See GCODE for best settings for bridging-infill.
Use the textured sheet and print it upside down to get a nice grain on the surface that suits the finish of the Prusa enclosure.