1 / 1
OpenMower Raspberry Pi 4 mount for YF500
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for the RPi 4 for the OpenMower Project fit in YardForce classic 500
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 20
- Makes
- 0
- Views
- 495
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a mount for Raspberry Pi 4 and Armour case for the open mower project. Fits in a YardForce classic 500 mower. You can also mount the Pololu AltIMU-10v5 but i do not recommend at because auf interference.
- Use M3 for the clip3
- Use M4 screws for mounting to case
I recommend to cut a M4 thread in the existing pins in the mower case. No need for cutting M3 thread in the baseplate for the clips.
- PLA, or better PETG
- Nozzle diameter 0,4
- Layer height 0,2
- Infill 40%