1 / 1
OpenMower external GPS survey anteanna mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An external mount for a GPS survey antenna fitting the YardForce classic 500
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 1
- Views
- 309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is an external mount for the ardusimple survey GPS antenna for the open mower project. Fits on the front case of a YardForce classic 500 mower.
- Take a one inch 5/8"-11 UNC hex head screw for antenna
- Use M4 screws for mounting.
- Drill holes in cover
- cut two EPDM rubber patches and additionally seal with silicone
- PLA, or better PETG
- Nozzle diameter 0,4
- Layer height 0,2
- Infill 20%