Bowling Trophy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
printing sanding with sand paper spraying with filler wet sanding with sand paper painting bonding together, All parts…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 143
- Makes
- 0
- Views
- 1,046
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- printing
- sanding with sand paper
- spraying with filler
- wet sanding with sand paper
- painting
- bonding together, All parts I glued together with Z-POXY (resin glue)
- varnishing
For better feel of the weight, is filled with gypsum
Printin time about 40 hours with 0.2
Weight about 1,5Kg
Hight 366mm
Bottom stand: Infill 20%, No supports and next infill abouth 100g gypsum,
Main stand: print whitout bottom and infill 5%, No supports and next infill abouth 900g gypsum
Pin: infill 30%, No supports
Ball: infill 30%, Yes supports
Medail: infill 20% No supports
Words: infill 100%, No supports
Print Settings
Printer:
Micromake D1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2-0.4
Infill:
5-30%
Category: Sculptures