Bowling Trophy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
printing sanding with sand paper spraying with filler wet sanding with sand paper painting bonding together, All parts…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 1046
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
- printing
- sanding with sand paper
- spraying with filler
- wet sanding with sand paper
- painting
- bonding together, All parts I glued together with Z-POXY (resin glue)
- varnishing
For better feel of the weight, is filled with gypsum
Printin time about 40 hours with 0.2
Weight about 1,5Kg
Hight 366mm
Bottom stand: Infill 20%, No supports and next infill abouth 100g gypsum,
Main stand: print whitout bottom and infill 5%, No supports and next infill abouth 900g gypsum
Pin: infill 30%, No supports
Ball: infill 30%, Yes supports
Medail: infill 20% No supports
Words: infill 100%, No supports
Print Settings
Printer:
Micromake D1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2-0.4
Infill:
5-30%
Category: Sculptures