Raspberry Pi 4 Model B case with fan integrated
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi 4 Model B case with fan integrated. Needed M2,5 screws etc.. see photo for sizes.
- Rating
- 5 / 5
- Likes
- 77
- Downloads
- 715
- Makes
- 7
- Views
- 4,390
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Raspberry Pi 4 Model B case with fan integrated.
Needed M2,5 screws etc.. see photo for sizes.
A Noctua NF-A4x10 5V fan
You can connect the fan to the 5Volt circuit on the Raspberry Pi or .. as I did to the 3.3V circuit on the Raspberry Pi, that is sufficient. Even with 100% CPU load temp do not arise beyond 50 degrees. No cool element needed in this setup.
Space with between fan and CPU is 3 mm. With the higher top it is 7mm.
Please like or leave a make picture as thank you.
Print instructions
Easy print, used the standard Prusament PETG settings in the Prusa slicer.
DO NOT use PLA!! If the Raspberry get hot... PLA will meld! PLA is a bad idea.