ZeroPanels For Voron V0.2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Remix of ZeroPanels v3 that was released for Printers for Ants. Slimmer design for the Voron V0.2
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 216
- Makes
- 2
- Views
- 2,711
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
This Remix modifies ZeroPanels to perfectly fit a Voron V0. bringing snap-on side panels to the V0.
This has been made with 2mm panels in mind
if you have 3mm panels you can either use the STLs provided without foam or use the CAD to export the STLs, a 3mm CAD is provided but most likely unsupported as i dont have 3mm panels
The models are made to try to keep the external dimensions of the V0.2 as close as possible, the resulting thickness of the snap-on panel clips should be no more than a few mm thicker than the stock screw-mounted clips, VBH tape can be omitted on all but the door.
The models also include support for the Voron V0.2 1515 extrusion tophat.
only the tophat hinge requires screwes due to the weight
Required Parts:
https://www.amazon.co.uk/gp/product/B0BFQVFNQD 1.5mm thick foam
https://www.amazon.co.uk/gp/product/B08LBZ8KGL 6.35mm wide vhb tape
ATTRIBUTION:
Thanks to zruncho3d, Grizzle357, sorkyl, Floaf, falo, SuperPringles, burningBeard, Ax4x Se7en, John, Kosh42EFG, schwaded, Bacon, chadonka